Ch341A Pro Mini Usb Bios Programmer

CH341A USB Mini Programmer Best Mini Programmer Schematic and Drivers and Software. This software is for CH341A mini USB bios programmer, both Black and Green Edition. It is in zip format. Download from the given link below and extract it to use. You do not need to install this software version. This is portable. Just download the extract and use it. It is 100% working and tested software, and everyone can download it free of cost from this site. Also, check out PCB Board Maker software such as Altium Designer Crack Free Download.

CH341A USB Mini Programmer Software Free Download Screenshots:

CH341A USB Mini is a USB interface chip that can emulate UART communication, standard parallel port, memory parallel port, and synchronous serial (I2C, SPI). The chip is manufactured by the Chinese company Jiangsu QinHeng Ltd. CH341A is used by some cheap memory programmers. The IC is somehow limited in this configuration because the programmer uses only the SPI and I²C interface and leaves a lot of pins unconnected. A popular device is the black CH341A MiniProgrammer, which you can buy for 2 to 5 USD.

The problem with these devices is that you get them without documentation or software. Drivers are available from the manufacturer’s website (but the site is written in Chinese). Also, some source codes are available from the manufacturer. There are open-source applications that support this programmer. But, first of all, let’s look at the hardware. A quick look at the board reveals the main electronic parts used: CH341A, a 12 MHz crystal required by the chip, a 3.3V regulator, two 7-pin headers, and the ZIF (zero insertion force) socket. The programmer can be bought with additional sockets and adapters, some with voltage-shifting circuits. After searching, I found a schematic of a CH341A USB Mini CH341A-based programmer, but it wasn’t exactly correct and complete. It didn’t have the pin headers on the sides of the ZIF socket, which I wanted to know what they were for. I took the multimeter and traced lines on the programmer’s PCB until I got a complete schematic. The schematic is quite simple, based on the datasheet.

The Features of CH341A USB Mini Programmer software:

This CH341 Mini programmer can program the following:

1. Satellite or Dish TV Receiver Flash IC (25 Series)
2. Analog Color TV Set Memory/Flash IC (24 Series)
3. LCD (24.25 series IC)
4. Desktop Motherboard Bios Program (25 Series)
5. Notebook/Laptop Flash IC (25 Series)
6. WIFI/Network Router (25 Series)
   Universal TV Card (25 Series)
7. DVD Flash IC (25 Series)
8. Set-top Boxes (25 Series)

Here are Some Software versions of a ch341 programmer crack + patch + serial keys + activation code full version to free download:

How to download and Install CH341A USB Mini Programmer software:

1. First, click the download button below and shift to the download page.
2. On the download page, you can easily download your software.
3. After downloading, please watch the video above and learn how to use it.